v2.1.0-beta.6

Bugfixes

• USB MIDI clock in and start/stop wasn’t working

Adjustments

• Don’t change time on active repeats when in TAIL mode
• Increased max number of active repeats to 256 per pattern

v2.1.0-beta.4

Adjustments

• FX mode tracks always create repeats in TAIL mode

v2.1.0-beta.3

New features

• Backup and restore
  • Per bank backup
  • Project backup
• FX mode input filter
  • Omni/same/fixed for filtering incoming midi notes
  • Active track filter

Adjustments

• Revamped bank view
  • Unsaved banks are displayed with yellow
  • Visualizations for copy/paste/erase bank have been revised
  • More contrast between used and unused banks

Bugfixes

• FX mode was not working when playback was stopped
• Banks were marked unsaved by entering step view
• CC mode midi channel was not saved in some cases
• Clear + Step was exiting step edit mode
• Ableton Link was slow at connecting on some networks
• View lock for secondary parameters was not working
• Fixed bug in downward facing ramp and climb style

v2.0.0-beta.4

New features

• Step editing
  • All parameters (including CCs) can be edited at every step
  • To edit a step:
    • Press step in the pulses view
    • [ BANK ] is blinking RED
    • Turn knob or press value buttons to change the parameter
    • Edited steps are displayed with RED
    • Press [ BANK ] to leave step editing mode.
  • Outside step editing mode, parameter changes are applied globally to all steps
  • Step editing on CC tracks is possible by double tapping the track in track view
  • Parameters excluded from step editing: tempo, delay, length, quantize
• FX tracks
  • A new track type “FX” tracks allows for processing midi input
  • Create an FX track by [ CTRL ] + 2x press [ VALUE ] in track view.
  • Incoming notes are automatically routed to all FX tracks in the pattern
  • With zero pulses, incoming notes are monitored directly
  • With non-zero pulses, incoming notes sets the chord for the pulses in the track
  • The ( PITCH ) menu on FX tracks can be used as a “live” MIDI keyboard
• Parameter quick view
  • Parameters are briefly displayed after turning knobs on T-1
  • This feature can be toggled in T-1 Config – > Misc (default: ON)
• Note routing ( OUTPUT )
  • The note output of a track can be routed into any of the other tracks
  • Hold [ CTRL ] + ( CHANNEL ) and select the destination tracks.
  • Multiple destination tracks can be selected.
• Multi channel tracks
  • Multiple MIDI channels can now be selected in ( CHANNEL )
• Slew on random
  • Add adjustable slew on random modulations by turning ( KNOB ) while holding [ CTRL ] + ( RANDOM )
  • Slew can be added to all parameters including CC
• Free division / time
  • Hold [ CTRL ] while turning ( DIVISION ) to change division freely in a resolution of 96 PPQN
  • Use random with slew to create accelerating patterns similar to ( PACE )
  • ( TIME ) can be adjusted freely as well by pressing [ VALUE 16 ] in ( TIME ) menu
• Poly / mono random
  • Quickly access polyphonic and monophonic random modulations on chords
  • Polyphonic affects each note in the chord differently, monophonic affects the whole chord
  • Positive random amount = polyphonic
  • Negative random amount = monophonic
  • Poly / mono random works on parameters
    • velocity
    • sustain
    • pitch
    • range
    • accent
    • timing
    • channel

Adjustments

• New shortcut: double tap track to enter pulses view
• Reworked cycles menu
  • ( CYCLES ) now changes the number of cycles.
  • Press a cycle in ( CYCLES ) view to edit the cycle
  • Each cycle can have its own step edits
  • Double tap a cycle to go to the pulses menu
• ( DIVISION ) works as a macro controlling ( TIME ) and ( RATE ) relatively
• Stop all repeats of the track by pressing [ CLEAR ] in ( REPEATS ) menu
• Updated random voicing behaviour
  • Negative random voicing randomizes the style
• Temp now works with CCs

Bugfixes

• Fixed jitter when turning knobs while auto saving

Synthdawg manual

• Synthdawg has created a new manual for T-1
• Please note that this is a work-in-progress:
  “Note that there will be errors, inconsistencies especially on the colours as I’m still updating. Better that feedback is limited for now but I hope to have a beta (As opposed to alpha) draft done in a weeks time.” (Synthdawg)

v1.3.0-beta.4

Bugfixes

• Fixes to how pulses are calculated when pulses have been manually inserted/removed.
• Manually inserted pulses are now indicated in DIM ORANGE.
• Some fixes to retriggers.
• Muted CC tracks are indicated with DARK BLUE.

v1.3.0-beta.3

Bugfixes

• Queuing a pattern while playing a chain didn’t work.
• Saving [ TEMP ] to pattern and playing the previous pattern destroyed the temp.

v1.3.0-beta.2

Adjustments

• Double tap [ PATTERN ] for hold.

v1.3.0-beta.1

Adjustments

• Retriggers (reset steps) are inserted with [ CLEAR ] + [ VALUE ] button instead of long press value button.
• All banks can be restored (ignoring the auto-saves) by holding [ BANK ] while booting the T-1.

Bugfixes

• A lot of fixes to changing patterns and banks and pattern chains.
• Random is now completely saved between pattern changes.

v1.2.7-beta.11

Adjustments

• Long press [ VALUE ] toggles reset steps instead of [ CTRL ] + double tap [ VALUE ]
• [ CTRL ] + [ VALUE ] in step sequencer view sets the number of steps.
• Turning [ CTRL ] + ( STEPS ) allows for changing steps without resyncing the track.

Bugfixes

• Fixed auto-saving tempo.
• Fixed ( LENGTH ) for values > 1 bar.

v1.2.7-beta.10

Bugfixes

• Fixed saving temp to pattern (again)
• Fixed sequence offset when changing pattern
• Fixed loading bank visualization bug

v1.2.7-beta.9

Bugfixes

• Fixed a bug that could cause auto-saves to be corrupted.

v1.2.7-beta.8

Bugfixes

• Fixed a fatal error in the pattern system.

v1.2.7-beta.7

New features

• Reset steps can now be inserted at any step. The reset steps can be moved with ( ROTATE ) as well. Reset steps are only displayed when holding [ CTRL ] in the step sequencer menu.

Adjustments

• CC number visualization uses BLUE to indicate zero.

Bugfixes

• More fixes to ( QUANTIZE ), chains with shorter quantize values works better.
• Fixed copying tracks and patterns and saving with [ TEMP ]. 

v1.2.7-beta.6

New features

• T-1 now auto-saves the state of all patterns.
  • The auto-saved patterns are loaded when starting the unit.
  • The bank that was open on last session will re-open upon starting the T-1.
• Each Euclidean cycle can now be up to 64 steps long.
  • Access this feature by holding [ CTRL ] while turning ( STEPS ).
  • Go to step sequencer view and hold [ CTRL ] and press [ BANK ], [ PATTERN ], [ TEMP ], and [ MUTE ] to view the 4 pages of the sequence.
• The CC number can now be adjusted on each knob on a CC track.
  • The CC number page is accessed by double tapping a CC knob + hold [ CTRL ] + press [ PATTERN ].

Adjustments

• The [ VALUE ] buttons in the ( STEPS ) and ( PULSES ) menu now behaves the same such that step sequences can be modified in both menus.
• The “reset step” replaces the reset cycle feature.
  • The reset step resets the sequence synchronizing the Euclidean cycle with random, phrase, groove and style.
  • The reset step can be inserted by holding [ CTRL ] and double tapping the first step in the step sequencer view.
• Muted CC tracks don’t send their saved CC value when launching the pattern containing the track.
• When copying a track, pattern, or bank the source is pulsating in green to make it clearer which item is being copied.
• The clock and reset outputs are reset when stopping the T-1.
• The colors of the ( RANDOM ) menu has been inverted such that RED means 100% random and BLUE means 0% random.
• The range of ( QUANTIZE ) has been limited to 1/8 – 16 bars.

Bugfixes

• Fixed crash when connected network was removed from T-1 Config.
• ( QUANTIZE ) was not working properly when changing away from 1 bar (regression from v1.2.0) 

v1.2.0-beta.6

Bugfixes

• 1.2v/oct was using wrong scaling.
• [ CLEAR ] + ( KNOB ) on CC track was clearing note parameter instead of CC value + modulation.
• Saved CC values were not sent when pressing [ PLAY ].
• Other CC tracks were blinking orange when CC track is selected.

Adjustments

• Don’t send CC when saving CC value to pattern [ CTRL ] + ( KNOB ).
• Only show saved CC visualization when saved.