DISCLAIMER: This is experimental software. Never use beta software if you have data on your T-1 that you cannot afford to lose. Also, never update to beta before playing a show or similar. Any of the features below are subject to change.
v2.1.0-beta.6
June 12, 2023
Bugfixes
USB MIDI clock in and start/stop wasn’t working
v2.1.0-beta.5
June 12, 2023
Adjustments
Don’t change time on active repeats when in TAIL mode
Increased max number of active repeats to 256 per pattern
v2.1.0-beta.4
June 7, 2023
Adjustments
FX mode tracks always create repeats in TAIL mode
v2.1.0-beta.3
June 6, 2023
New features
Backup and restore
Per bank backup
Project backup
FX mode input filter
Omni/same/fixed for filtering incoming midi notes
Active track filter
Adjustments
Revamped bank view
Unsaved banks are displayed with yellow
Visualizations for copy/paste/erase bank have been revised
More contrast between used and unused banks
Bugfixes
FX mode was not working when playback was stopped
Banks were marked unsaved by entering step view
CC mode midi channel was not saved in some cases
Clear + Step was exiting step edit mode
Ableton Link was slow at connecting on some networks
View lock for secondary parameters was not working
Fixed bug in downward facing ramp and climb style
v2.0.0-beta.4
November 11, 2022
New features
Step editing
All parameters (including CCs) can be edited at every step
To edit a step:
Press step in the pulses view
[ BANK ] is blinkingRED
Turn knob or press value buttons to change the parameter
Edited steps are displayed withRED
Press [ BANK ] to leave step editing mode.
Outside step editing mode, parameter changes are applied globally to all steps
Step editing on CC tracks is possible by double tapping the track in track view
Parameters excluded from step editing: tempo, delay, length, quantize
FX tracks
A new track type “FX” tracks allows for processing midi input
Create an FX track by [ CTRL ] + 2x press [ VALUE ] in track view.
Incoming notes are automatically routed to all FX tracks in the pattern
With zero pulses, incoming notes are monitored directly
With non-zero pulses, incoming notes sets the chord for the pulses in the track
The ( PITCH ) menu on FX tracks can be used as a “live” MIDI keyboard
Parameter quick view
Parameters are briefly displayed after turning knobs on T-1
This feature can be toggled in T-1 Config – > Misc (default: ON)
Note routing ( OUTPUT )
The note output of a track can be routed into any of the other tracks
Hold [ CTRL ] + ( CHANNEL ) and select the destination tracks.
Multiple destination tracks can be selected.
Multi channel tracks
Multiple MIDI channels can now be selected in ( CHANNEL )
Slew on random
Add adjustable slew on random modulations by turning ( KNOB ) while holding [ CTRL ] + ( RANDOM )
Slew can be added to all parameters including CC
Free division / time
Hold [ CTRL ] while turning ( DIVISION ) to change division freely in a resolution of 96 PPQN
Use random with slew to create accelerating patterns similar to ( PACE )
( TIME ) can be adjusted freely as well by pressing [ VALUE 16 ] in ( TIME ) menu
Poly / mono random
Quickly access polyphonic and monophonic random modulations on chords
Polyphonic affects each note in the chord differently, monophonic affects the whole chord
Positive random amount = polyphonic
Negative random amount = monophonic
Poly / mono random works on parameters
velocity
sustain
pitch
range
accent
timing
channel
Adjustments
New shortcut: double tap track to enter pulses view
Reworked cycles menu
( CYCLES ) now changes the number of cycles.
Press a cycle in ( CYCLES ) view to edit the cycle
Each cycle can have its own step edits
Double tap a cycle to go to the pulses menu
( DIVISION ) works as a macro controlling ( TIME ) and ( RATE ) relatively
Stop all repeats of the track by pressing [ CLEAR ] in ( REPEATS ) menu
Updated random voicing behaviour
Negative random voicing randomizes the style
Temp now works with CCs
Bugfixes
Fixed jitter when turning knobs while auto saving
Synthdawg manual
Synthdawg has created a new manual for T-1
Please note that this is a work-in-progress: “Note that there will be errors, inconsistencies especially on the colours as I’m still updating. Better that feedback is limited for now but I hope to have a beta (As opposed to alpha) draft done in a weeks time.” (Synthdawg)
v1.3.0-beta.4
September 6, 2022
Bugfixes
Fixes to how pulses are calculated when pulses have been manually inserted/removed.
Manually inserted pulses are now indicated in DIM ORANGE.
Some fixes to retriggers.
Muted CC tracks are indicated with DARK BLUE.
v1.3.0-beta.3
August 31, 2022
Bugfixes
Queuing a pattern while playing a chain didn’t work.
Saving [ TEMP ] to pattern and playing the previous pattern destroyed the temp.
v1.3.0-beta.2
August 31, 2022
Adjustments
Double tap [ PATTERN ] for hold.
v1.3.0-beta.1
August 30, 2022
Adjustments
Retriggers (reset steps) are inserted with [ CLEAR ] + [ VALUE ] button instead of long press value button.
All banks can be restored (ignoring the auto-saves) by holding [ BANK ] while booting the T-1.
Bugfixes
A lot of fixes to changing patterns and banks and pattern chains.
Random is now completely saved between pattern changes.
v1.2.7-beta.11
August 25, 2022
Adjustments
Long press [ VALUE ] toggles reset steps instead of [ CTRL ] + double tap [ VALUE ]
[ CTRL ] + [ VALUE ] in step sequencer view sets the number of steps.
Turning [ CTRL ] + ( STEPS ) allows for changing steps without resyncing the track.
Bugfixes
Fixed auto-saving tempo.
Fixed ( LENGTH ) for values > 1 bar.
v1.2.7-beta.10
August 22, 2022
Bugfixes
Fixed saving temp to pattern (again)
Fixed sequence offset when changing pattern
Fixed loading bank visualization bug
v1.2.7-beta.9
August 19, 2022
Bugfixes
Fixed a bug that could cause auto-saves to be corrupted.
v1.2.7-beta.8
August 15, 2022
Bugfixes
Fixed a fatal error in the pattern system.
v1.2.7-beta.7
August 12, 2022
New features
Reset steps can now be inserted at any step. The reset steps can be moved with ( ROTATE ) as well. Reset steps are only displayed when holding [ CTRL ] in the step sequencer menu.
Adjustments
CC number visualization uses BLUE to indicate zero.
Bugfixes
More fixes to ( QUANTIZE ), chains with shorter quantize values works better.
Fixed copying tracks and patterns and saving with [ TEMP ].
v1.2.7-beta.6
July 15, 2022
New features
T-1 now auto-saves the state of all patterns.
The auto-saved patterns are loaded when starting the unit.
The bank that was open on last session will re-open upon starting the T-1.
Each Euclidean cycle can now be up to 64 steps long.
Access this feature by holding [ CTRL ] while turning ( STEPS ).
Go to step sequencer view and hold [ CTRL ] and press [ BANK ], [ PATTERN ], [ TEMP ], and [ MUTE ] to view the 4 pages of the sequence.
The CC number can now be adjusted on each knob on a CC track.
The CC number page is accessed by double tapping a CC knob + hold [ CTRL ] + press [ PATTERN ].
Adjustments
The [ VALUE ] buttons in the ( STEPS ) and ( PULSES ) menu now behaves the same such that step sequences can be modified in both menus.
The “reset step” replaces the reset cycle feature.
The reset step resets the sequence synchronizing the Euclidean cycle with random, phrase, groove and style.
The reset step can be inserted by holding [ CTRL ] and double tapping the first step in the step sequencer view.
Muted CC tracks don’t send their saved CC value when launching the pattern containing the track.
When copying a track, pattern, or bank the source is pulsating in green to make it clearer which item is being copied.
The clock and reset outputs are reset when stopping the T-1.
The colors of the ( RANDOM ) menu has been inverted such that RED means 100% random and BLUE means 0% random.
The range of ( QUANTIZE ) has been limited to 1/8 – 16 bars.
Bugfixes
Fixed crash when connected network was removed from T-1 Config.
( QUANTIZE ) was not working properly when changing away from 1 bar (regression from v1.2.0)
v1.2.0-beta.6
March 9, 2022
Bugfixes
1.2v/oct was using wrong scaling.
[ CLEAR ] + ( KNOB ) on CC track was clearing note parameter instead of CC value + modulation.
Saved CC values were not sent when pressing [ PLAY ].
Other CC tracks were blinking orange when CC track is selected.
Adjustments
Don’t send CC when saving CC value to pattern [ CTRL ] + ( KNOB ).