Fixed bug with repeats being silenced for time values larger than 1/16.
Fixed bug with secondary parameter not being opened when pressing [ CTRL ] + ( KNOB ) + [ CTRL ].
The user scale was not cleared when clearing the track.
Added note filter on MIDI outputs. (Configurable in T-1 Config.)
Sustain is now relative to division, 50% sustain = 1x division, 100% sustain = 16x division.
Fixed crash when adding random modulation to steps.
Fixed CV outputs when using them in "gate" mode.
When reloading banks, new patterns where not cleared properly.
When clearing patterns, tracks went out of sync in some cases.
When copying tracks with chords, randomness applied to chords were not saved properly.
Multi track selection
Multiple tracks can now be edited at once, by selecting multiple tracks. Knobs make relative changes across tracks. Pressing the [ VALUE ] buttons in parameter menus sets all selected tracks to the same value.
Global pattern editing
When holding [ PATTERN ], changes are applied to all tracks in the pattern. Knobs make relative changes across tracks. Pressing the [ VALUE ] buttons in parameter menus sets all tracks to the same value.
Global cycles editing
Outside the ( CYCLES ) menu, changes to tracks apply to all cycles. Knobs make relative changes across cycles. Pressing the [ VALUE ] buttons in parameter menus sets all cycles to the same value, effectively removing cycles on the selected parameter.
In the pattern menu, pattern chains can be created by selecting multiple patterns. The selected patterns will be played in sequence according to their ( QUANTIZE ) value. Pattern chains are saved in banks. Existing chains on other banks can be played by pressing the [ PATTERN ] button after selecting a bank in the [ BANK ] menu.
Parameter values can be copied along with their associated cycles. Press [CTRL] + [CLEAR] + (KNOB) to copy a parameter. The parameter is pasted by pressing the destination tracks similarly to pasting a track.
When holding or double tapping the ( TEMPO ) knob, the tempo is visualized on the [ VALUE ] buttons. The tempo range is 26-280 BPM where each [ VALUE ] button corresponds to 16 BPM.
Allows for copying tracks and parameters between patterns and patterns between banks.
Press [ CTRL ] + [ CLEAR ] + double tap [ TRACK ] / [ PATTERN ] / ( KNOB) to add a track/pattern/parameter to the clipboard. Items from the clipboard can be pasted using [ CLEAR ] + [ TRACK ] / [ PATTERN ].
The variations introduced by turning the ( RANDOM ) knob are now much more subtle for low values of random variation.
Randomness applied to polyphonic tracks has been reworked which changes randomness behaviour on previously saved banks on the upper notes entered in the ( PITCH ) menu.
When double tapping the ( CYCLES ) knob, the cycles editing mode is active until the ( CYCLES ) knob is pressed again or by pressing [ BANKS ].
When pressing [ CLEAR ] in the ( LENGTH ) menu, the loop point is quantized to the track’s original timeline instead of the current step position.
Program change messages are now sent 1/8th note before any pattern change.
The hotspot created by T-1 can now be configured in T-1 Config.
The reset input/output can now be configured in both run and reset modes.
Improved synchronization with Ableton Link, setting the Link offset is now more responsive.
Values on sliders in T-1 Config can now be entered manually by clicking the number box.
The saved networks in T-1 Config can now be removed/forgotten.
Fixed issue with MIDI out 2 not sending MIDI notes.
Fixed quantization issue when changing the number of cycles.
Fixed crash when pressing [ CTRL ] + ( SCALE ) + an unlit [ VALUE ] button.
Fixed issue with T-1 not loading the LED brightness and Link offset setting after reboot.
Fixed flicker in the step visualization when using ( LENGTH ).
Fixed issue with positive ( TIMING ) values being too subtle when using x2 and x4 divisions.
Fixed issue with connecting to network names containing emojis 🤦
When an external MIDI/Analog clock signal is lost, the T-1 will stop.
Fixed issue when using external clock causing T-1 to freeze and output random MIDI data.
Fixed issue with start/stop not working properly when using external clock.
Fixed issue with first note not being triggered when using external clock.
Fixed issue when updating firmware on a computer with an user account name containing spaces.
Fixed issue with restoring banks from Config on some devices.
Timing is now added to the T-1. This feature adds microtiming to your tracks. The beat grid can be stretched in both directions with 3 different subdivisions of the main division.
Improved clock engine (better external sync MIDI/Analog).
T-1 Config loads faster.
Clock (MIDI/Sync out) is only sent when playing.
Removed confirmation when saving banks. Banks are now saved immediately when releasing the button corresponding to the bank that should be saved.
Sync in RST now starts the T-1.
When selecting the user scale, the scale is chosen upon releasing the user scale button.
Support tools added to T-1 Config for performing reset, backup and update of T-1
Pattern queued while pressing stop is now selected immediately.
Only banks which contain patterns can be cleared with the [ CLEAR ] button.
Fixed issue with ( DELAY ) not working properly after stopping.
Fixed issue with tempo not being loaded properly from banks.
Fixed issue with repeats not being reset after stopping.
Fixed issue with memory leak in T-1 Config.
[ PLAY ] button now sends start/stop messages through MIDI and Ableton Link. [ CTRL ] + [ PLAY ] can be used to start/stop T-1 without sending start/stop messages to other devices.
Retune CV outputs to C instead of A. C3 = 1.0 V
Fixed crash with MIDI sync USB/TRS as slave.
Fixed issue with user scales not being saved.
Fixed PPQN setting for clock input/output.
Fixed issue with cycles are not being looped correctly with ( LENGTH ).
Fixed bug in the TRS MIDI input implementation, which caused the MIDI input to be malfunctional on some units.
Fixed issue with PPQN settings in T-1 Config not being saved to the T-1.
Fixed issue with sysex messages sent from T-1 causing issues with some USB-MIDI hosts. T-1 now only sends sysex messages when T-1 Config is open.
Fixed issue with sysex messages sent to T-1 meant for other devices causing the T-1 to crash.
Program change out is disabled by default.