If your T-1 got bricked during a firmware update you will need to perform a manual firmware upload. Follow the instructions below to perform a manual firmware upload:
- Run from the menu bar of T-1 Config: “Tools” → “Download Firmware”
This will place a .zip in your download folder - And then “Tools” → “Upload Firmware”
Select the downloaded .zip in the pop-up dialog - The script will now upload firmware to your T-1, it takes about 2 minutes.
- NOTE: If automatic port detection fails, follow the on screen instructions to manually enter the serial port.
macOS: It will be called something like “/dev/tty.usbmodemXXXXX”
Windows: It will be called something like “COMxx”, select the one with baudrate = 115200 or 460800